zSG for surgical guide
Verified 3D printer
The following parameters are not guaranteed due to the information obtained from the user. If you have any major differences or suggestions, please feel free to report them.
Phrozen Sonic mini
Layer height 0.1mm Number of initial layers 6 Exposure time 3.1s Exposure time of initial layer 50s Off delay time 8s Initial layer extinguishing delay 10s Initial layer lift distance 6mm Lift height 8mm (6-10mm) Initial climb speed 80mm Rise speed 80mm (100-180mm) Retract speed 110mm Phrozen Shuffle 4k
Layer height 0.1mm Number of initial layers 6 Exposure time 10-15s Exposure time of initial layer 60s Off delay time 8s Initial layer extinguishing delay 15s Initial layer lift distance 6mm (6-8mm) Lift height 8mm (6-10mm) Initial climb speed 80mm Rise speed 80mm (100-180mm) Retract speed 110mm Precautions for use
Sterilization method
Temperature and time of autoclave sterilization (121 ℃ 20 minutes · 126 ℃ 15 minutes · 134 ℃ 10 minutes) No drying.
Expiration date is one year from the date of manufacture
This resin has a high curing reaction due to ultraviolet rays, and the expiration date is set to one year from the time of manufacture, so it is sold in 500 mL. When not modeling, close the upper air hole with the attached rubber stopper for storage, and use as soon as possible after opening.
Storage method
It is designed to have a very high curing reaction by ultraviolet rays, and it may deteriorate due to heat and affect the stability of modeling, so store it in a cool and dark place . When not modeling, close the upper air hole with the attached rubber stopper for storage, and use as soon as possible after opening.
使用期限:製造より1年
本レジンは紫外線による硬化反応が高く、使用期限は製造より1年に設定しているため、500mLでの販売をしています。造形時以外は上部の空気孔を付属のゴム栓で閉じて保管し、開封後はできるだけ早くにお使いください。
一般医療機器 届出番号
28B3X10005000083